2 ½” Spinning Riffler other laboratory equipment
≈ US$1,379
Grenzach-Wyhlen6908 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 7624 98...
Show
+49 7624 9889756
+49 170 81...
Show
+49 170 8106758
Germany 
Germany, Grenzach-Wyhlen
Germany, Pullach
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Location:munich
Germany, Grenzach-Wyhlen
Germany, Lörrach
Germany, Grenzach-Wyhlen
Germany, Location:bamberg
Germany, Lörrach
Germany, Location:nuremberg
Germany, Lörrach
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Lörrach
Germany, Grenzach-Wyhlen
Germany, Grenzach-Wyhlen
Germany, Cologne
* Sample division by rotation: A rotating distributor disc (riffler)
model: 2 ½” Spinning Riffler
tension: 220 V AC
frequency: 50 Hz
engine: Boston Gear, Ratio 60
* Material: Stainless steel, transparent plexiglass cover
* Origin: USA
* Power consumption: approx. 250–400 W
mass: 167 Kg
Dimensions: 125x70x150 cm
The Sepor 2 ½” laboratory spinner (Spinning Riffler) is a high-quality sample dividing device for uniform and precise sub-samples in laboratory analysis or production. The device is ideal for the preparation of solid samples, especially in Mining, chemical, pharmaceutical or food industries,
The system consists of the parts shown in the pictures.
The used device is in good condition with visible signs of wear, but fully functional.
Advantages:
- Homogeneous sample division: Optimal reproducibility through rotating sample inlet distribution
- Robust construction: Made entirely of stainless steel, ideal for industrial applications
- Transparent chamber: Safe observation of the process possible
- Flexible application: Suitable for powder mixtures, granules or fine solids
---------------------------------------------------------------
General functions
- Sample division by rotation: A rotating distribution disc (riffler) feeds material evenly into several fractions.
- Filling funnel with dosing slide
- Drive via Boston Gear gear motor
- Motor control via DCX Plus + FMC Syntron PowerPulse controller
- Easy to clean and convert
- Mounted on castors, mobile use
---------------------------------------------------------------
CO₂ savings
By using this used laboratory dividing device, the production of a new device is saved.
This means a CO₂ saving of estimated 1,000 – 1,500 kg CO₂,
This corresponds approximately to:
- the electricity consumption of a household for 2–3 months or
- the CO₂ emissions of a Small car at approx. 6,000–8,000 km
---------------------------------------------------------------
* Probenteilung durch Rotation: Eine rotierende Verteilerscheibe (Riffler)
Modell: 2 ½” Spinning Riffler
Spannung: 220 V AC
Frequenz: 50 Hz
Motor: Boston Gear, Ratio 60
* Material: Edelstahl, transparente Plexiglas-Abdeckung
* Herkunft: USA
* Leistungsaufnahme: ca. 250–400 W
Gewicht: 167 Kg
Maße: 125x70x150 cm
Der Sepor 2 ½” Laborspinner (Spinning Riffler) ist ein hochwertiges Probenteilungsgerät für gleichmäßige und präzise Teilproben in der Laboranalytik oder Produktion. Das Gerät eignet sich ideal zur Aufbereitung von Feststoffproben, insbesondere in der Bergbau-, Chemie-, Pharma- oder Lebensmittelindustrie.
Die Anlage besteht aus den Teilen die in den Bildern zu sehen ist.
Das gebrauchte Gerät ist in gutem Zustand mit sichtbaren Gebrauchsspuren, aber voll funktionsfähig.
Vorteile:
- Homogene Probenteilung: Optimale Reproduzierbarkeit durch rotierende Probeneinlassverteilung
- Robuste Bauweise: Komplett aus Edelstahl, ideal für industrielle Anwendungen
- Transparente Kammer: Sichere Beobachtung des Prozesses möglich
- Flexible Anwendung: Geeignet für Pulvermischungen, Granulate oder feine Feststoffe
---------------------------------------------------------------
Allgemeine Funktionen
- Probenteilung durch Rotation: Eine rotierende Verteilerscheibe (Riffler) führt Material gleichmäßig mehreren Fraktionen zu.
- Fülltrichter mit Dosierschieber
- Antrieb über Boston Gear Getriebemotor
- Motorsteuerung über DCX Plus + FMC Syntron PowerPulse Regler
- Einfach zu reinigen und umzurüsten
- Auf Rollen montiert, mobil einsetzbar
---------------------------------------------------------------
CO₂-Einsparung
Durch die Nutzung dieses gebrauchten Laborteilungsgeräts wird die Produktion eines neuen Geräts eingespart.
Dies bedeutet eine CO₂-Einsparung von geschätzten 1.000 – 1.500 kg CO₂.
Das entspricht etwa:
- dem Stromverbrauch eines Haushalts für 2–3 Monate oder
- dem CO₂-Ausstoß eines Kleinwagens auf ca. 6.000–8.000 km
---------------------------------------------------------------